|
|
 |
|
INTERACTIVE CROSSOVER DESIGN - XO_LEFT AND XO_RIGHT
|
|
Resistors, Capacitors and Inductors:
Usage: Rn N0 N1 value
Cn N0 N1 value
Ln N0 N1 value
Examples: R1 0 3 6.1 * A 6.1 ohm resistor connected nodes 0 (ground) and 3
C1 3 4 4.2uF * A 4.2uF capacitor connected nodes 3 and 4
L1 4 0 820E-6 * A 820uH inductor connected to nodes 4 and 0 (ground)
Nodes
- Node '0' is reserved as ground and must be used somewhere in the circuit. In
general, node zero (ground) is used as the input signal common.
- Node numbers (other than zero) are internally renumbered after the circuit is
read into memory and can therefor have any unique numeric value
|
|
|
Copyright 2007, Smith & Larson Audio |
|
