|
|
 |
|
INTERACTIVE CROSSOVER DESIGN - XO_LEFT AND XO_RIGHT
|
|
Resistors, Capacitors and Inductors:
Usage: Vn N0 N1 value
Examples: Vsig 0 1 1 * A 1 vrms signal is connected to nodes 0 (ground) and 1
Drive signals
- There will only be one amplifier driving your crossover so only one drive signal
needs to be defined in an ICD source file. The signal itself is automatically
swept over the entire test signal range of frequencies. Therefor no further
definitions are needed. Also, the final outputs are rescaled, so the signal
level also has no meaning at this time.
- One of the node numbers for the signal source must be '0' (ground).
|
|
|
Copyright 2007, Smith & Larson Audio |
|
